How to create windows 10 , 8 , 7 bootable USB drive

You can't install windows on your device without having where to install it from because you might need to format your hard drives here comes the useful thing Bootable usb  drive .

A common use USB flash drives is to use them to boot into Windows. Booting from removable media such as a USB drive allows you to perform diagnostics on a computer that is having trouble booting from the hard drive

lets look the easiest ways to make your USB flash drive a bootable USB drive 

• Downloading windows image file 

The Windows Imaging Format is a file-based disk image format. It was developed by Microsoft to help deploy Windows Vista and subsequent versions of the Windows operating system family, as well as Windows Fundamentals for Legacy PCs.

if you don't have windows image file on your computer here's the link you can follow to download windows 10 image file 

DOWNLOAD WINDOWS 10 IMAGE FILE HERE

• Downloading power-ISO 

power ISO is a software program that is used to create bootable drives for compressing files or extracting them etcetera

power ISO is the software program that we are going to be using in this process if you don't have power ISO installed on your computer you can download it  HERE

       Steps of creating USB bootable drive 

1. Start power ISO 
2. Insert the USB drive you intend to boot from
3. Choose the menu "Tools > Create Bootable USB Drive". The "Create Bootable USB Drive" dialog will popup. If you are using Windows Vista or above operating system, you need confirm the UAC dialog to continue.
4. 
   
   
5. In "Create Bootable USB Drive" dialog, click "..." button to open the iso file of Windows operating system.
6. Select the correct USB drive from the "Destination USB Drive" list if multiple USB drives are connected to the computer.
7. Choose the proper writing method. "USB-HDD" is recommended.
8. Click "Start" button to start creating bootable USB drive.
   

   

PowerISO will alert you that all data on USB drive will be destroyed. Click "OK" to continue.

The program will start writing USB drive, and showing the progress information. You should get the message "Writing USB drive completed successfully." after the operation completes.

After your bootable USB drive finish to write successfully you can now start to boot from your USB drive 

      Configuring the BIOS 

ou should now reboot and go into the BIOS configuration to boot from USB. Instructions for doing so vary wildly from system to system, but generally entail the following:

1. Reboot the system.
2. While booting (before Windows starts loading), get into the BIOS configuration screen by hitting something like F1, F2, Delete or Escape. Hotkey instructions are generally provided on the screen.
3. Go to the section that contains your boot devices.
4. With your USB drive plugged in, the USB drive should be listed. If it isn’t, your system might not support booting from USB. Assuming that it is supported (as is the case with virtually all modern hardware), promote your USB drive to the primary boot device.
5. Exit from the BIOS configuration, saving all changes.

Please notice that you can seriously screw up your system by providing incorrect BIOS settings!

      Booting and setup windows from USB drive 

Assuming that you properly configured your BIOS and your USB drive supports booting,  Windows setup should now load. Depending on the speed of your USB drive, this may take a while.

If it isn’t working, then double-check the following before making a scene:

• Is your BIOS properly configured for booting from the USB device? (Is the USB device listed and does it have top priority?)
• Have you correctly prepared the USB drive in step one? (Restart the procedure.)
• Does your USB drive properly support being booted from? (Try another one!)

NOTE: the above process is done on windows 10,8/8.1,7 and Windows Vista 

If you faced any problem during process you can watch this Video

Feel free to comment our your problem it will be our pleasure to help you out 😀